1. All castings of the machine are made of high-grade HT250 cast iron, which are completely annealed to eliminate residual internal stress and keep deformation for a long time.
2. The guide rail is silver linear guide rail from Hiwin, Taiwan. It adopts full support design to ensure cutting stability, guide rail accuracy and mechanical life.
3, three axis C3 precision ball screw, after mid-cycle heat treatment and precision grinding, each axis is pre-drawn to reduce thermal deformation, high positioning and repetition accuracy.
4, all machines factory by Renishaw laser interferometer accurate detection, to ensure the three-axis precision backlash, ensure positioning accuracy.
5, three axes are servo driven, smooth transmission, high precision, large torque.
6. The three-axis track is covered with dustproof and anti-chip telescopic cover to protect the track and ball screw from wear caused by cutting water and residual material entering.
7, standard 218M machining center CNC system, optional Siemens 808D CNC system.
8, the main shaft is BT30, the transmission of cutting torque, 8 station tool library, can greatly improve the processing efficiency and precision of complex products.
9, spindle motor adopts 2.2KW servo spindle motor and drive, large power, spindle can be directional tool change can be rigid tapping.
10, 8 station tool library, knife change time is short, knife change action is safe and reliable.
11, electronic handwheel three gears adjustable greatly convenient operation and knife.
12, add balance weight block inside the column, the spindle runs smoothly up and down.
13. The fully enclosed sheet metal cover ensures the cleanliness and safety of the working area.
14, intermittent lubrication system, full protection structure and pneumatic broach system.
15, integrated water tank and pump system, program or manual control of processing coolant switch.
16, air pressure detection switch, when the pressure is lower than the rated pressure alarm, to ensure the safety of processing and tool change.
17, processing residue collection device, convenient and simple cleaning.
18. The whole machine has beautiful appearance and compact structure.

Processing range	X axis stroke	mm	300
	Y axis stroke	mm	175
	Z axis stroke	mm	270
	Max. drilling/milling capacity	mm	13
	Milling capacity cutter head(max.)	mm	16
	Max. end milling capacity	mm	50
	Spindle to table	mm	115-385
	spindle to column	mm	235
Worktable	Worktable size	mm	450x160
	T-slot (width*slot number*spacing)	mm	3-12-50
Spindle	Spindle drive mode	/	Unpowered spindle
	Main axis speed	rpm	300-3500
	Spindle power	kw	1.1
	Spindle taper	/	MT#3
Feed drive	X, Y, Z axis rapid traverse speed	mm/min	6000
	X, Y, Z axis torque	N.m
Positioning accuracy (X, Y, Z axis)		mm	0.03
Repeated positioning (X, Y, Z axis)		mm	0.02
Handwheel		Yes/No	Yes
Cooling system		Yes/No	Yes
CNC system		/	Xendoll
Air pressure		pa	0.55-0.6Mpa
Machine power		V/Hz	AC220V/50Hz
Gross weight/net weight		kg	300/350
Product size/dimension		mm	900x950x1750
Shipping size/dimension		mm	1100x1040x2000