The VMC300-3 small CNC machining center uses a voltage of 380 volts, occupies a small area, consumes less electricity, and combines transparent acrylic with sheet metal to improve observation safety while ensuring the structural stability of the machine. It is fully enclosed. Enhanced functionality, three axis linkage, equipped with Xendol industrial grade CNC system, suitable for international general programs, automatic fault detection and alarm function, and power outage memory function.
1. Using 380V voltage, it occupies a small area and consumes less electricity. It combines transparent acrylic with sheet metal to improve observation safety while ensuring the structural stability of the machine. It is fully enclosed.
2. Adopting a 12 station bamboo hat type knife magazine, using a 0.6Mpa air pressure.
3. Enhanced functionality, three axis linkage, equipped with Xendol industrial grade CNC system, suitable for international general programs, automatic fault detection and alarm function, and power outage memory function.
4. The spindle is a high-precision industrial grade spindle with a spindle taper of ISO20 and a spindle speed of 300-3500 rpm.
5. The spindle motor has a power of 1.1KW and can be used for milling, drilling, carving and other processing processes.
6. The three-axis track is covered with a dust and chip proof telescopic cover to protect the track and ball screw from wear caused by cutting water and debris entering.
7. Three axis C3 grade precision double nut ball screw, after medium cycle heat treatment and precision grinding, each axis is pre tensioned to reduce thermal deformation, with high positioning and overlap accuracy.